Hager 34G Pull Plate 4 in. x 16 in. US3 Stock No 052894
The Hager 34G Pull Plate 4 in. x 16 in. US3 Stock No 052894 is also known as part number #034G000400160300. Purchase Hager Trim & Auxilary parts today from Industrial Hardware and Specialties.
The Hager 34G Pull Plate 4 in. x 16 in. US3 Stock No 052894 is the perfect finishing touch to your building project. With it's US3 finish you can be sure that your trim device can match any design needs.The Hager Item Number #034G000400160300 is a 4" x 16" pull plate that’s meets ANSI/BHMA A156.6 Architectural Door Trims Whatever you need, from pulls to push plates, protection plates to door edgings, wall and floor stops to flush bolts, coordinators, signage, and much more - Hager trim & auxiliary products give you great looks and proven durability.
Hager 34G Pull Plate 4 in. x 16 in. US3 Stock No 052894
- Gauge: 0.050 in.(1.3 mm)
- Certification: Meets ANSI A156.6 for J405 Pull Plate
- Materials: Aluminum . brass . bronze . stainless steel
- Standard Sizes:
- 3-1/2 in. x 15 in. (89 mm x 381 mm)
- 4 in. x 16 in. (102 mm x 406 mm)
- 6 in. x 16 in. (152 mm x 406 mm)*
- 8 in. x 16 in. (203 mm x 406 mm)* - *(size not available for 50 and A50 Series)
- Fasteners: Six (6) #6 x 5/8 OPH tapping screws
- Finishes: US3 . US4 . US10 . US10B . US26 . US26D . US28 . US32 . US32D
- Notes: For sizes or finishes not listed in this catalog . contact Hager Customer Service for availability
| Vendor | Hager |
|---|---|
| Series | 34G |
| Finish (Fin.) | US3 - Bright Brass |
| Material | Brass |
| Height (in.) | 16 |
| Width (in.) | 4 |
| Pull Type | 4 - Round Wrought Door Pull |
| Pull CTC Length | 8 |
| Gauge (in.) | .050 |
| Fasteners Included | Six (6) #6 x 5/8 OPH tapping screws |
| Hager Item Number | 034G000400160300 |
| Hager UPC | 041359528944 |
| Hager Part Number | 34G 4" x 16" US3 |
| Catalog | Trim & Auxiliary Catalog |
