Toggle Nav
Company Phone Number
My Cart
Search
Menu
Account

Industrial Hardware and Specialties is classified as an ESSENTIAL business and is fully operational.

Please read our COVID-19 Message to our valued customers.

Pole Gripper

hexhead
hexheadwasher
hexhead17
hexhead17washer

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Quad-Shield Coated

    Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexhead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Type S, Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexheadwasher
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low Thread, Type ‘17’, Quad-Shield Coated

  • Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Hi-Low Thread, Type '17', Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.
Filter  
  1. Length (in.) 1 Remove This Item
  2. Length (in.) 1/2 Remove This Item
Clear All
Length (in.)  
X
  1. 1 4 items
  2. 1-1/2 4 items
  3. 2 4 items
  4. 2-1/2 4 items
  5. 3 4 items
Show more
Washer  
  1. No Washer 2 items
  2. With Sealing Washer 2 items
Diameter Ø TPI  
  1. #9-15 2 items
  2. #10-14 2 items
Drill Point  
  1. Type 17 2 items
  2. Type S Point 2 items
Box Size  
  1. 3000 1 item
  2. 4000 1 item
  3. 5000 1 item
  4. 7000 1 item
View as Grid List

4 Items

per page
Set Descending Direction
  1. PGA1016, pole gripper screws, 10-14 x 1 pole gripper fasteners

    Sku #: 355-PGA1016

    10-14 x 1 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Type 17 Quad-Coated Pole Gripper Screws
    Special Price $256.00 Regular Price $345.60
    Add to Wish List Add to Compare
  2. PG1016, pole gripper screws, 10-14 x 1 pole gripper fasteners

    Sku #: 355-PG1016

    Indented Hi-Hex Washer Head w/Shoulder 10-14 x 1 Type 17 Quad-Coated Pole Gripper Screws
    Special Price $210.75 Regular Price $284.51
    Add to Wish List Add to Compare
  3. PGA916, pole gripper screws, 9-15 x 1 pole gripper fasteners

    Sku #: 355-PGA916

    9-15 x 1 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Quad-Coated Pole Gripper Screws
    Special Price $331.32 Regular Price $447.28
    Add to Wish List Add to Compare
  4. PG916, pole gripper screws, 9-15 x 1 pole gripper fasteners

    Sku #: 355-PG916

    Indented Hi-Hex Washer Head w/Shoulder 9-15 x 1 Quad-Coated Pole Gripper Screws
    Special Price $257.81 Regular Price $348.05
    Add to Wish List Add to Compare
Shop By
Now Shopping by
  1. Length (in.) 1 Remove This Item
  2. Length (in.) 1/2 Remove This Item
Clear All
Shopping Options
Length (in.)
  1. 1 4 items
  2. 1-1/2 4 items
  3. 2 4 items
  4. 2-1/2 4 items
  5. 3 4 items
Show more
Washer
  1. No Washer 2 items
  2. With Sealing Washer 2 items
Diameter Ø TPI
  1. #9-15 2 items
  2. #10-14 2 items
Drill Point
  1. Type 17 2 items
  2. Type S Point 2 items
Box Size
  1. 3000 1 item
  2. 4000 1 item
  3. 5000 1 item
  4. 7000 1 item