Indented Hi-Hex Washer Head w/Shoulder 9-15 x 1 Quad-Coated Pole Gripper Screws
The Indented Hi-Hex Washer Head w/Shoulder 9-15 x 1 Quad-Coated Pole Gripper Screws from Industrial Hardware and Specialties are designed to attach metal to wood. These 9-15 pole gripper fasteners are made from steel with a quad-coating, they have a hi-hex washer head w/shoulder and should be installed with a 1/4" indented hex drive. This pole gripper screw is 1" long with a type s point they are sold in box sizes of 7000 pcs ( 46 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Indented Hi-Hex Washer Head w/Shoulder 9-15 x 1 Quad-Coated Pole Gripper Screws. These Pole Gripper Screws are designed to attach metal to wood.This pole gripper fastener is made of a quad-coated steel. The quad-coating is a high-grade metal surface processing technology that prevents corrosion. the coating system constists of four layers: a metallic zinc layer, a hex-chromium passivation, a layer of functional nano coating used as a sealer, and a high-grade anti-corrosion chemical conversion film.Salt sprayed tested to 1000 hours, the 355-PG916 has held up to 15 cycles of Kesternich testing, and has acid rain protection. An excellent choice for outdoor and high corrosive applications. These 9-15 pole gripper screws have a hi-hex washer head w/shoulder, a Type S Point, are 1" long, and should be installed with a 1/4" indented hex drive. You can purchase these pole gripper fasteners from Industrial Hardware and Specialties in boxes of 7000 pcs ( 46 lbs.).
Strong-Point Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Strong Shield Coated, 9-15 x 1, Box of 7,000
- Used in roofing and siding applications
- ACQ compatible
- Rust/Acid rain protection
- Quad-coating exceeds 1,000/hr. salt spray resistance
- High degree of corrosion resistance
| Vendor | InSpec |
|---|---|
| Category | Pole Gripper Screws |
| Length (in.) | 1 |
| Surface Coating | Quad-Coated |
| Head Type | Hi-Hex Washer Head w/Shoulder |
| Drive Type | Indented Hex |
| Drive Size | 1/4 |
| Diameter Ø TPI | #9-15 |
| Drill Point | Type S Point |
| Application | Attaches metal to wood. |
| Box Size | 7000 |
