5/8 x 2-1/4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F15
Special Price
$ 3.50
Regular Price
$ 5.17
- Buy 100 for $ 1.47 each and save 58%
5/8 x 2-1/4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 25
5/8" x 2-1/4" long sleeve anchor with a 1/2" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 2" embed depth with ultimate holding values of 3404 lb. pullout, and 5625 lb. shear in 4000 psi concrete.
5/8 x 2-1/4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 5/8 x 2-1/4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 5/8" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F15
- Diameter5/8"
- Effective Anchor Length5/8-13 x 2 1/4"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth2"
- Bolt Diameter1/2"
- 4000 PSI Pull Out3404 lbs.
- 4000 PSI Shear5625 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
