Z-Supports From Steel-E.G. (Zinc Plated) With 1-5/8 in. Offset And 3-Holes
The Z-Supports From Steel-E.G. (Zinc Plated) With 1-5/8 in. Offset And 3-Holes is designed to fasten to or join together sections of all channel ( strut ).InSpec Z-Supports Fittings are made of electro galvanized zinc plated steel to handle high compression loads.
From Industrial Hardware and Specialties InSpec line is the 3D-244-F01 or the Z-Supports From Steel-E.G. (Zinc Plated) With 1-5/8 in. Offset And 3-Holes. Formely known as the 1F-244-F-01 or 4725 this Z-Supports Fitting is designed to be used with 1-5/8" channel ( strut ). The 3D-225-F05 is constructed from steel, wiith an electro-galvanized zinc plating, and a dimension of 1-5/8" x 1-5/8" x 3-3/4". This 3-hole fitting is best suited for 1/2" bolts. The Z-Supports From Steel-E.G. (Zinc Plated) With 1-5/8 in. Offset And 3-Holes is equivlent to : UNISTRUT P1045, POWERSTRUT PS 611, SUPERSTRUT A209, B-LINE B105, PHD 5554, HAYDON A-322.
Z-Supports From Steel-E.G. (Zinc Plated) With 1-5/8 in. Offset And 3-Holes
| Vendor | InSpec |
|---|---|
| Old Part# | 1F-244-F-01 |
| Series | 4725 |
| Catalog Page# | 23 |
| Fitting Type | Z-Support 1-5/8 Offset |
| For Use with | 1-5/8 In. Channel ( Strut ) |
| Material/Finish (Mtrl/Fin) | Steel Electro-Galvanized (Zinc Plated) |
| Hole Count ( Hole# ) | 3 |
| Dimension | 1-5/8 x 1-5/8 x 3-3/4 |
| Thickness | 1/4 |
| Hole Size | 0.56 (9/16") |
| Bolt Size | 0.50 (1/2") |
| Distance (Hole â„„) | 1-7/8 |
| B-LINE® | B105 |
| HAYDON® | A-322 |
| PHD® | 5554 |
| POWERSTRUT® | PS 611 |
| SUPERSTRUT® | A209 |
| UNISTRUT® | P1045 |
