Phillips Pan Head Framing Screws 6 x 7/16 Phosphate Coated Drywall Screws
The Phillips Pan Head Framing Screws 6 x 7/16 Phosphate Coated Drywall Screws from Industrial Hardware and Specialties are designed to attach 20 gauge metal track to 20 gauge metal studs. These #6 drywall fasteners are made from steel with a phosphate coating, they have a pan head and should be installed with a #2 phillips drive. This drywall screw is 7/16" long with a type s point they are sold in box sizes of 10000 pcs ( 25 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Phillips Pan Head Framing Screws 6 x 7/16 Phosphate Coated Drywall Screws. These Drywall Screws are used to attach 20 gauge metal track to 20 gauge metal studs.This drywall fastener is made of a phosphate coated steel. The phosphate coating is a conversion coating used to add mild corrosion resistance and provide lubricity. Salt sprayed tested to 48 hours, the 355-6F should be used indoors in dry, non-corrosive applications. These #6 drywall screws have a pan head, a Type S Point, are 7/16" long, and should be installed with a #2 phillips drive. You can purchase these drywall fasteners from Industrial Hardware and Specialties in boxes of 10000 pcs ( 25 lbs.).
Strong-Point Phillips Pan Head Framing Screws, Phosphate Coated, 6 x 7/16, Box of 10,000
- Type ‘S’ point for fastening light gauge steel
- Serrations to prevent spin out
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM C 1002 for type ‘S’ products
| Vendor | InSpec |
|---|---|
| Category | Drywall Screws |
| Length (in.) | 7/16 |
| Surface Coating | Phosphate Coated |
| Head Type | Pan Head |
| Drive Type | Phillips |
| Drive Size | #2 |
| Diameter Ø TPI | #6 |
| Drill Point | Type S Point |
| Application | Attaches 20 gauge metal track to 20 gauge metal studs. |
| Box Size | 10000 |
