Phillips Bugle Head 7 x 2-1/2 Phosphate Coated Fine Drywall Screws
The Phillips Bugle Head 7 x 2-1/2 Phosphate Coated Fine Drywall Screws from Industrial Hardware and Specialties are designed to attach gypsum board to light gauge steel. These #7 drywall fasteners are made from steel with a phosphate coating, they have a bugle head and should be installed with a #2 phillips drive. This fine thread drywall screw is 2-1/2" long with a Type S Point, they are sold in box sizes of 2500 pcs ( 20 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Phillips Bugle Head 7 x 2-1/2 Phosphate Coated Fine Drywall Screws. These Drywall Screws are designed to be used when you need to attach gypsum board to light gauge steel.This drywall fastener is made of a phosphate coated steel. The phosphate coating is a conversion coating used to add mild corrosion resistance and provide lubricity. Salt sprayed tested to 48 hours, the 355-722 should be used indoors in dry, non-corrosive applications. These fine thread #7 drywall screws have a bugle head, a Type S Point, are 2-1/2" long, and should be installed with a #2 phillips drive. You can purchase these drywall fasteners from Industrial Hardware and Specialties in boxes of 2500 pcs ( 20 lbs.).
Strong-Point Phillips Bugle Head, Fine Thread, Phosphate Coated, 7 x 2-1/2, Box of 2,500
- Type ‘S’ point for fastening gypsum to light gauge steel
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM C 1002 for attaching gypsum board to steel studs
| Vendor | InSpec |
|---|---|
| Category | Drywall Screws |
| Length (in.) | 2-1/2 |
| Surface Coating | Phosphate Coated |
| Head Type | Bugle Head |
| Drive Type | Phillips |
| Drive Size | #2 |
| Diameter Ø TPI | #7 |
| Thread Description | Fine Thread |
| Drill Point | Type S Point |
| Application | Attaches gypsum board to light gauge steel. |
| Box Size | 2500 |
