N2009-SS-6: 7/8-9 x 6 in Long with 3 in Thread Plain Pattern Eyebolt with Nut 304 Stainless Steel Electro-Polished - Made in the USA
N2009-SS-6: 7/8-9 x 6 in Long with 3 in Thread Plain Pattern Eyebolt with Nut 304 Stainless Steel Electro-Polished - Made in the USA
Provided by Industrial Hardware and Specialties is the N2009-SS-6: 7/8-9 x 6 in Long with 3 in Thread Plain Pattern Eyebolt with Nut 304 Stainless Steel Electro-Polished - Made in the USA. These 7/8-9 Plain Pattern Eyebolt with Nuts have a 6" long shank, with 3" of thread. They feature a 1-3/4" inside diameter for hanging fittings, or hoisting loads. With a rated capacity of 7,200lbs / 3,266kgs when used in straight vertical tension applications. Made in the USA from Drop Forged Stainless Steel Type 304 Passivated & Electro-Polished.
Eyebolt Rated Capacity Guidelines
- Eyebolts are designed with a 5:1 Safety Factor
- The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity
- Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed
Knowledge Base
If your looking for more information on Eyebolts checkout the Industrial Hardware and Specialties Knowledge Base
| Type | Eyebolt w/nut |
|---|---|
| Thread Standard | U.S. Standard |
| Bolt Diameter-TPI | 7/8-9 |
| Shank Length | 6 in |
| ID | 1-3/4 in |
| Eye O.D. | 3-1/2 in |
| Rated Capcity lbs. | 7,200 |
| Rated Capcity kg | 3,266 |
| Pattern | Plain Pattern |
| Material | Drop-Forged Stainless Steel Type 304 |
| Plating/Coating | Passivated & Electro-Polished |
| Rated Capacity 46+ | Plain Eyebolts are not recommended for angular load applications. Safety Swivel Hoist Rings are recommended for such applications |
| Thread Style | Partial Thread |
| Thread Length | 3 in |
| Fit | UNC-2A |
