M12 x 1.25 Spark Plug (ISO) x 11.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 - Made in USA
The M12 x 1.25 Spark Plug (ISO) x 11.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 is a spark plug insert designed for automotive repair. The insert has a preapplied adhesive on the external threads which activates upon installation. This American Made free-running insert has a M12 x 1.25 Spark Plug (ISO) Right-Hand internal thread and is 0.452 long. The inserts external thread is M18 x 1.5 Right-Hand ISO.
M12 x 1.25 Spark Plug (ISO) x 11.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14
SwiftSert Spark Plug inserts designed for automotive repair applications are solid threaded inserts built with solid wall construction for greater strength. Manufactured from Carbon Steel 12L14, these self-locking inserts open immediately upon installation. The pre-applied LOCTITE on the external threads sets immediately allowing for the newly installed insert to be fastener ready. This American Made free-running insert has a M12 x 1.25 Spark Plug (ISO) Right-Hand internal thread and is 0.452 long. The inserts external thread is M18 x 1.5 Right-Hand ISO. Order today from Industrial Hardware and Specialties.
Features
- Easy to install: solid threaded inserts install with standard tools, simply drill, tap and thread like any ordinary fastener (no special taps or installation tools are necessary)
- Strength: carbon steel solid threaded inserts are screw machined out of solid steel for a stronger overall product
- Standard OD Threads: solid threaded inserts for metal permit the use of standard drills and taps
- Self-Locking: pre-applied adhesive activates upon installation
- Vibration Resistant: adhesive secures the carbon steel solid threaded insert into place so it won't back out
- Seals against Liquids/Gases: solid threaded inserts are pressurized up to 6,000 psi.
Applications:
- Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike helical inserts, which require a special tap and installation tool, SwiftSert threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.- Simply drill the correct sized hole with a standard drill
- Tap your hole with a standard tap
- Turn in the SwiftSert insert like an ordinary fastener with a screwdriver, bolt and jam nut, or a drive tool.
SwiftSert threaded inserts are self-locking and open immediately upon installation. The pre-applied adhesive on the external threads sets immediately allowing for the newly installed insert to be fastener ready.
SwiftSert solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering.
| Application | Metals |
|---|---|
| Material | Carbon Steel 12L14 |
| Insert Style | Free-Running |
| Drive | Slotted |
| ID Thread Rotation | Right-Hand |
| ID Thread Standard | ISO Metric |
| ID Acronym | Spark Plug (ISO) |
| OD Thread Rotation | Right-Hand |
| OD Thread Standard | ISO Metric |
| OD Acronym | ISO |
| Flange/Flush | Flush |
| Wall Thickness | Standard |
| Inside Thread | M12 x 1.25 |
| Length | 11.5mm |
| Drill Size | 0.6496 (16.5mm) |
| Plug Tap Size | M18 x 1.5 |
| Decimal Outside Diameter | 0.7087 (M18 x 1.50) |
| Chrislynn Part Number | 9750-14 |
