Light Duty Beam Clamp With 7/8 in. Maximum Capacity From Steel-E.G. (ZP) With 7/8 in.
The Light Duty Beam Clamp With 7/8 in. Maximum Capacity From Steel-E.G. (ZP) With 7/8 in. from Industrial Hardware and Specialties InSpec line is designed to secure InSpec all channnel or threaded rod to flanges, beams, or supports. Check out the complete Industrial Hardware and Specialties Beam Clamp Catalog, to see the complete line offered.
From Industrial Hardware and Specialties InSpec line we have the 3D-112-F01 or Light Duty Beam Clamp With 7/8 in. Maximum Capacity From Steel-E.G. (ZP) With 7/8 in.Formerly known as 1F-112-F-01 or 4805 this light duty beam clamp is designed for attatchment to I-beams, channels, and flange beams.The Light Duty Beam Clamp With 7/8 in. Maximum Capacity From Steel-E.G. (ZP) With 7/8 in. Maximum Capacity has a max recommended load of (450* lbs. when used in pairs), and and is designed to be used with 3/8-16 x 1-1/2" screws. The 3D-112-F01 is equivlent to : G-STRUT G-408-1/4, UNISTRUT P1272S, POWERSTRUT PS 998, SUPERSTRUT U515B, ERICO BC180037EG, B-LINE B212-3/8, PHD 7011, Haydon C-408 1/4.
Light Duty Beam Clamp With 7/8 in. Maximum Capacity From Steel-E.G. (ZP) With 7/8 in. Maximum Capacity
| Vendor | InSpec |
|---|---|
| Old Part# | 1F-112-F-01 |
| Series | 4805 |
| Clamp Type | C-Clamps with Set Screw |
| For Use with | All Channel ( Strut ) |
| Material/Finish (Mtrl/Fin) | Steel Electro-Galvanized (Zinc Plated) |
| Max Recommended Load | 450* |
| Rod Connector Nut Thickness | 1/4 |
| Dimension | 1-1/4" Wide |
| B-LINE® | B212-3/8 |
| ERICO® | BC180037EG |
| G-STRUT® | G-408-1/4 |
| HAYDON® | C-408 1/4 |
| PHD® | 7011 |
| POWERSTRUT® | PS 998 |
| SUPERSTRUT® | U515B |
| UNISTRUT® | P1272S |
| Catalog Page# | 44 |
