Karp KHD 5-1/2 in. x 5-1/2 in. Hinged Duct Access Door With Double Cam Latch
The Karp KHD 5-1/2 in. x 5-1/2 in. Hinged Duct Access Door With Double Cam Latch from Industrial Hardware and Specialties is a 5-1/2" x 5-1/2", non-fire rated, insulated, steel, duct door.The 2F-KHD0606 has a non-removable door with an aluminum continuous hinge and designed to fit rough openings that are 4-3/4" x 4-3/4".
From Industrial Hardware and Specialties we have the Karp KHD 5-1/2 in. x 5-1/2 in. Hinged Duct Access Door With Double Cam Latch. This 5-1/2" x 5-1/2" duct access door (hinged) is constructed from steel with a electro-galvanized finish. This KHD model duct Access Door is non-removable but is furnished with aluminum continuous piano continuous hinges for quick and easy duct access.The 22 gauge electro-galvanized Steel frames are easily attached to duct with steel notched knockover tabs.The 2F-KHD0606 fits duct openings that are 4-3/4" x 4-3/4".
Karp KHD 5-1/2 in. x 5-1/2 in. Hinged Duct Access Door With Double Cam Latch
| MATERIAL: | Frame: 22 ga. galvanized steel Door (≤ 12"x 12"): 24 ga. steel Door (> 12"x 12"): 22 ga. steel |
| HINGE TYPE: | Aluminum continuous piano |
| LATCH TYPE: | Zinc plated steel cam latches |
| NOTES: | 1/2" thick x 1/8" wide closed cell neoprene gasketing between door & frame. Back of frame has 5/8" notched knock-over edges Door is filled with 2" thick fiberglass insulation compressed into 1". R factor equals 7.7 |
Cross Reference Model Numbers for Karp KHD
| Acudor : | HD-5070 |
| Elmdor: | DT |
| Williams: | WB-ADH-D |
| Mifab: | UD |
Disclaimer :
This cross reference list is intended to be used as a tool to determine an equivalent to the Karp Model KHD based on another door manufacturer's model number.Model numbers of other manufacturers are shown for products that appear to be equivalent in their functional use, though not necessarily interchangeable. Every effort has been made to ensure the accuracy of this information, though Industrial Hardware and Specialties will assume no responsibility for errors or omissions which may have occurred. As such, Industrial Hardware and Specialties recommends verification of the information necessary to make the appropriate product selection for a given application.
| Vendor | Karp |
|---|---|
| Mounting | Duct Application |
| Model | KHD |
| Door Size | 5-1/2" x 5-1/2" |
| Rough Duct Opening | 4-3/4" x 4-3/4" |
| Material | Steel |
| Finish | Electro-Galvanized |
| Door Swing | Swings Out |
| Hinge Type | Continuous |
| Hinge Material | Aluminum |
| Safety Chain (Chain) | No Chain Option |
| Fire Rating | Not Fire-Rated |
| Door Gauge | 24 Gauge |
| Frame Gauge | 22 Gauge |
| Flange Width | 1/8" |
| Insulated / Non-Insulated | Insulated |
| Spring Assist | Spring Not Available |
| Gasket | Standard Door Is Gasketed |
| Watertight | No Watertight Option |
| Configuration | Duct Access Door (Hinged) |
| Removable Door | Non-Removable |
| Hinge Visibility | Exposed |
| Elmdor | DT |
| Acudor | HD-5070 |
| Mifab | UD |
| Williams Bros. | WB-ADH-D |
