Indented Slotted Hex Washer 5/16" AF #10 Head 1/2 OD Sealing Washer 10 x 1 Zinc Plated Needle Point Screws
The Indented Slotted Hex Washer 5/16" AF #10 Head 1/2 OD Sealing Washer 10 x 1 Zinc Plated Needle Point Screws from Industrial Hardware and Specialties are designed to attach light gauge sheet metal to medium gauge sheet metal. These #10 needle point fasteners are made from steel with a zinc plating, they have a #10 af hex washer head with a 1/2 neoprene-epdm bonded sealing washer and should be installed with a 5/16" indented slotted drive. This needle point screw is 1" long with a they are sold in box sizes of 2500 pcs ( 22 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Indented Slotted Hex Washer 5/16" AF #10 Head 1/2 OD Sealing Washer 10 x 1 Zinc Plated Needle Point Screws. These Needle Point Screws are designed to attach light gauge sheet to medium gauge sheet metal.This needle point fastener is made of a zinc plated steel. The zinc plating is applied electrically to the fastener providing a protective barrier that helps prevent oxidation. Salt sprayed tested to 24 hours, the 355-NA10165 should only be used in indoors or in non-corrosive applications. These #10 needle point screws have a #10 af hex washer head, are 1" long, and should be installed with a 5/16" indented slotted drive. You can purchase these needle point fasteners from Industrial Hardware and Specialties in boxes of 2500 pcs ( 22 lbs.).
Strong-Point Slotted Indented Hex Washer Head, Zinc Plated with 1/2" O.D. Bonded Washer, 10 x 1, 5/16" A.F. #10 Head, Box of 2,500
- Meets ASTM A 510 for carbon steel manufacturing
- Zinc plating meets ASTM B 633 for electrodeposited zinc coatings
- Meets ASTM F1941 for corrosion resistance
| Vendor | InSpec |
|---|---|
| Category | Needle Point Screws |
| Length (in.) | 1 |
| Surface Coating | Zinc Plated |
| Head Type | #10 AF Hex Washer Head |
| Washer | 1/2 Neoprene-EPDM Bonded Sealing Washer |
| Drive Type | Indented Slotted |
| Drive Size | 5/16 |
| Diameter Ø TPI | #10 |
| Drill Point | 22° Point |
| Application | Attaches light gauge sheet metal to medium gauge sheet metal. |
| Box Size | 2500 |
