Hager 790-905 Concealed Leaf 85in Hinge EPT Stock No 149006
If your looking for more information on the The Hager 790-905 Concealed Leaf 85in Hinge EPT Stock No 149006. Check out the Industrial Hardware and Specialties Inc. Knowledge Base. Here you will find product specifications, templates, installation guides , and all other related files for all Hager Stainless Steel Hinges
From Industrial Hardware and Specialties comes the Hager 790-905 Concealed Leaf 85in Hinge EPT Stock No 149006. This 790-905 Series heavy duty stainless steel continuous hinge is designed and engineered to evenly distribute door weight along the full length of the door, which eliminates localized stresses on the frame and reduces hinge failure. All 790 Series stainless steel continuous hinges are always installed flush with the top edge of the door, and are brushed to a satin finish (US32D). The Hager 790-905 Concealed Leaf 85in Hinge EPT Stock No 149006 is constructed 14-gauge type 304 stainless steel with lubricated nylon 6/6 bearings between each knuckle and stainless steel pin.
Hager 790-905 Concealed Leaf 85in Hinge EPT Stock No 149006
| Clearance: | - 9/32" (7.1 mm) minimum hinge side - Plus standard lockside clearance |
| Fasteners: | - #10-24 x 5/8" S/S Dril-Kwik (R) (metal frame) - #1/4-32 x 3/4'' S/S machine screw (used with adjustment stud) - # 7/16-20 x 1-3/8" S/S adjustment stud (metal/wood door) |
| Length Options: | - Standard and Custom |
| Door Reinforcement: | - Wood - None required - Metal - Recommended 16-gauge channel at heavier weight - For metal doors, a 1/8" (3 mm) thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs |
| Frame Reinforcement: | - None required |
| Fire Rating: | - Up to 3 hr. metal and 90 min. wood composite |
| Special Features: | - 1/4" (6.3 mm) diameter Stainless Steel Pin - Dual 6/6 Nylon bearings between each knuckle - Door edge protection lip (both faces of door) - Not recommended for doors with a beveled edge on the hinge side - 1/16" (1.6 mm) inset> |
| Note: | - For metal doors, a 1/8" (3.2mm) thick reinforcement plate is strongly recommended along the hinge edge for proper thread engagement of the adjustment studs. - Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames. - Tamper resistant hospital tip available |
| Vendor | Hager |
|---|---|
| Style (Styl.) | Concealed Leaf |
| Series | 790-905 |
| Hinge Length (Len) | 85" |
| Handing (Hand.) | Left Handed |
| Finish (Fnsh.) | US32D |
| Centerlining (CL.) | 42" |
| Electric (Elec) | EPT-Electric Power Transfer |
| Tips (Tips) | No Tip |
| Fasteners (Fstnrs.) | #10-16 x 1-1/4'' S/S Type AB (wood door)& #1/4-32 x 3/4'' S/S machine screw (used with adjustment stud)& #7/16-20 x 1-3/8" S/S adjustment stud (metal/wood door) |
| Hager Item Number | PL905085032D000001E420 |
| Hager UPC | 798550490067 |
| Hager Part Number | 790-905 85" US32D 1PK LH EPT 42" TO C/L |
| Hager Template | Template |
| Catalog | Stainless Steel Continuous Hinges Door Hardware Catalog |
