Fig.121 Plain L-Shaped Anchor Bolt 1/2-13 in. x 18 in. With 5/8 Radius
The Fig.121 Plain L-Shaped Anchor Bolt 1/2-13 in. x 18 in. With 5/8 Radius is Made in USA with American material. Constructed from Low Carbon Steel ( C1008-C1018 ) with a plain surface, the part number 121-05.18.016.02-P06 is weldable with a right hand UNC (National Coarse) rolled thread. The L-Shaped anchor bolt has an overall length of 18", a hook length of 1.625", a 5/8" radius, a 1/2-13 thread diameter pitch, and a thread length of 2". Order today from Industrial Hardware and Specialties.
Fig.121 Plain L-Shaped Anchor Bolt 1/2-13 in. x 18 in. With 5/8 Radius | |
From Industrial Hardware and Specialties is the Fig.121 Plain L-Shaped Anchor Bolt 1/2-13 in. x 18 in. With 5/8 Radius This 90 degree L-Shaped anchor bolt ( or bent anchor bolt ) is used as an anchoring device in concrete embedments to attach sill plates to concrete or masonry foundations, anchor light poles, signs, and many other general anchorage applications. The part number 121-05.18.016.02-P06 is made in America with domestic weldable Low Carbon Steel ( C1008-C1018 ) with a plain surface coating ( finish ). The L-Shaped anchor bolt has an overall length of 18", a hook length of 1.625", a 5/8" radius, a 1/2-13 thread diameter pitch, and a thread length of 2". This steel L-Hook anchor has a rolled, right hand UNC (National Coarse) thread. Order today from Industrial Hardware and Specialties, Inc. by the piece or in bulk. |  |
| Vendor | InSpec |
|---|---|
| Diameter ⌀ Thread Pitch (in) | 1/2-13 |
| Length (in.) | 18 |
| Hook (in.) | 1.625 |
| Thread Length ( in.) | 2 |
| Material Grade | Low Carbon Steel C1008-C1018 |
| Weldable | Weldable |
| Finish | Plain |
| Thread Type | Rolled Thread |
| Rotation-Pitch-Fit | Right-Hand UNC-1A |
| Inside Radius | 5/8 |
| Grade Marking | No Grade Marking |
| Made/Material | USA/USA |
