Toggle Nav
Company Phone Number
My Cart
Search
Menu
Account

Industrial Hardware and Specialties is classified as an ESSENTIAL business and is fully operational.

Please read our COVID-19 Message to our valued customers.

Pole Gripper

hexhead
hexheadwasher
hexhead17
hexhead17washer

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Quad-Shield Coated

    Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexhead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Type S, Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexheadwasher
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low Thread, Type ‘17’, Quad-Shield Coated

  • Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Hi-Low Thread, Type '17', Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.
Filter  
  1. Box Size 3000 Remove This Item
Clear All
Length (in.)  
  1. 1 1 item
  2. 1-1/2 1 item
  3. 2 1 item
Washer  
  1. No Washer 2 items
  2. With Sealing Washer 1 item
Diameter Ø TPI  
  1. #9-15 1 item
  2. #10-14 2 items
Drill Point  
  1. Type 17 2 items
  2. Type S Point 1 item
Box Size  
X
  1. 1000 3 items
  2. 1500 5 items
  3. 2000 2 items
  4. 2500 3 items
  5. 3000 3 items
  6. 4000 2 items
  7. 5000 1 item
  8. 7000 1 item
Show more
View as Grid List

3 Items

per page
Set Descending Direction
  1. PGA1016, pole gripper screws, 10-14 x 1 pole gripper fasteners

    Sku #: 355-PGA1016

    10-14 x 1 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Type 17 Quad-Coated Pole Gripper Screws
    Special Price $256.00 Regular Price $345.60
    Add to Wish List Add to Compare
  2. PG1024, pole gripper screws, 10-14 x 1-1/2 pole gripper fasteners

    Sku #: 355-PG1024

    Indented Hi-Hex Washer Head w/Shoulder 10-14 x 1-1/2 Type 17 Quad-Coated Pole Gripper Screws
    Special Price $174.33 Regular Price $235.34
    Add to Wish List Add to Compare
  3. PG932, pole gripper screws, 9-15 x 2 pole gripper fasteners

    Sku #: 355-PG932

    Indented Hi-Hex Washer Head w/Shoulder 9-15 x 2 Quad-Coated Pole Gripper Screws
    Special Price $193.10 Regular Price $260.69
    Add to Wish List Add to Compare
Shop By
Now Shopping by
  1. Box Size 3000 Remove This Item
Clear All
Shopping Options
Length (in.)
  1. 1 1 item
  2. 1-1/2 1 item
  3. 2 1 item
Washer
  1. No Washer 2 items
  2. With Sealing Washer 1 item
Diameter Ø TPI
  1. #9-15 1 item
  2. #10-14 2 items
Drill Point
  1. Type 17 2 items
  2. Type S Point 1 item
Box Size
  1. 1000 3 items
  2. 1500 5 items
  3. 2000 2 items
  4. 2500 3 items
  5. 3000 3 items
  6. 4000 2 items
  7. 5000 1 item
  8. 7000 1 item
Show more