EN-10-2H-ZN: 1-8 x 1-9/16 in long Style D-Elongated Eye Nut from Zinc Plated Drop Forged Carbon Steel Made in U.S.A.
The EN-10-2H-ZN: 1-8 x 1-9/16 in long Style D-Elongated Eye Nut from Zinc Plated Drop Forged Carbon Steel Made in U.S.A. has a 10,000 lb. Rated Capacity. Rated Capacities are based on a 5 to 1 Design Factor. The Rated Capacities listed are for Eye Nuts only, based on vertical pulls and not connected to bolts or studs.
EN-10-2H-ZN: 1-8 x 1-9/16 in long Style D-Elongated Eye Nut from Zinc Plated Drop Forged Carbon Steel Made in U.S.A.
Provided by Industrial Hardware and Specialties is the EN-10-2H-ZN: 1-8 x 1-9/16 in long Style D-Elongated Eye Nut from Zinc Plated Drop Forged Carbon Steel Made in U.S.A.. These Style D-Elongated Eye Nuts are Drop Forged from C1045 Carbon Steel to ASTM A194-2H and finished with a Zinc Plating. It has a 1-8 ( UNC-2B* ) diameter thread pitch with an internal thread length that is 1" long. The Eye Nut has an inside Diameter of 2-1/4", an outside diameter of 4", and an overall length of 5".
Style D-Elongated Eye Nut Rated Key Features
- Rated Capacity : 10,000 lbs
- Drop Forged C1045 Carbon Steel
- Zinc Plated
- Tapped UNC-2B* *UNC-2B Prior to Plating
Knowledge Base
If your looking for more information on Eye Nuts checkout the Industrial Hardware and Specialties Knowledge Base
| Type | Style D-Elongated Eye Nut |
|---|---|
| Thread Standard | U.S. Standard |
| Bolt Diameter-TPI | 1-8 |
| ID | 2-1/4 in |
| Eye O.D. | 4 in |
| Rated Capcity lbs. | 10,000 |
| Material | Drop-Forged Carbon Steel C1045 |
| Plating/Coating | Zinc Plated |
| Thread Length | 1 in |
| Bail Diameter | 7/8 in |
| Overall Length | 5 in |
| Specification | ASTM A194-2H |
| Fit | UNC-2B* |
