Campbell #6423500 GX Sharp Leg Plate Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL
The Campbell #6423500 GX Sharp Leg Plate Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL from Industrial Hardware and Specialties is a variation of the standard GX clamp designed to lift stacked plates from horizontal to vertical position. The Campbell UPC number 020418175534 has a working load limit of a 1/2 metric ton, and a 1/16" to 5/8" grip range. Made in the USA
The Campbell #6423500 GX Sharp Leg Plate Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL is a versatile American Made clamp that is designed to lift stacked plates from horizontal to vertical position. The clamp has a Working Load Limit of 1/2 metric ton and a grip range of 1/16" to 5/8". The Campbell 6423500 is not equipped with a swiveling pad and it should not be used for turning a load. An exclusive feature of Campbell GX Model Clamps is their wear indicator system. If the cam's teeth are damaged or dulled between the unique wear indicator grooves, it's time to replace the cam. Campbell recommends replacing the pads every time you replace the cam. You can purchase the Campbell #6423500 at Industrial Hardware and Specialties today.
Campbell #6423500 GX Sharp Leg Plate Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL
- Designed to Lift Stacked Plates From Horizontal to Vertical Positions in A 90° Arc (Not 180°)
- Long Sharp Leg Can Be Driven Between Top Two Plates to Fully Engage the Clamp
- Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each Clamp
- Minimum WLL of at Least 10% of the Maximum WLL
- Replacement Parts Are Same As for Standard “GX” Clamps
| Vendor | Campbell® Chain & Fittings |
|---|---|
| Apex Catalog Number | 6423500 |
| UPC | 020418175534 |
| Minimum Grip Width | 1/16 in |
| Maximum Grip Width | 5/8 in |
| Working Load Limit | 1102 lb (1/2 Metric Ton) |
