Campbell #6410301 Double Alloy Chain And Lifting Clamp Sling for Drums 1 Metric Ton WLL
The Campbell #6410301 Double Alloy Chain And Lifting Clamp Sling for Drums 1 Metric Ton WLL from Industrial Hardware and Specialties is designed to lift a great variety of drums with or without heads from horizontal, vertical, or reversed positions. The Campbell UPC number 020418095665 has a working load limit of a 1 metric ton. Made in the USA
The Campbell #6410301 Double Alloy Chain And Lifting Clamp Sling for Drums 1 Metric Ton WLL is a versatile American Made Double Chain Sling designed to accommodate a great variety of drums with or without heads removed. The Double sling assembly consists of a 9 ⁄32" alloy chain, and two No. 52 drum lifters ( Campbell Part #6410101 ) and CO-1 master link. The assembly has a Working Load Limit of 1 metric ton, with each clamp having an inside diameter of the eye of 1-3/4". Each clamp snaps onto the drum and is held there by its spring-loaded cam, even if there is no load. Drums can be lifted from horizontal or vertical position and reversed. You can purchase the Campbell #6410301 at Industrial Hardware and Specialties today.
Campbell #6410301 Double Alloy Chain And Lifting Clamp Sling for Drums 1 Metric Ton WLL
- Lifts Steel Drums With or Without Heads Removed
- Drums Can Be Lifted From Either Horizontal or Vertical Positions and Then Reversed
- Snaps Onto Drum and is Held There By Its Spring Loaded Cam Even When There is No Load
- Note: This Clamp is Not Suitable for Lifting Plates or Sheets
- Double Sling Assembly Consisting of 9/32 " Alloy Chain, Two No. 52 Drum Lifter Clamps and CO-1 Master Link
- Chain Legs Connected By Quik-Alloy® Coupling Links
- Working Load Limit Rated at 60°
| Vendor | Campbell® Chain & Fittings |
|---|---|
| Apex Catalog Number | 6410301 |
| UPC | 020418095665 |
| Minimum Grip Width | 1/16 in |
| Maximum Grip Width | 7/8 in |
| Working Load Limit | 2204 lb (1 Metric Ton) |
| Includes | Double Sling Assembly Consisting of 9/32 " Alloy Chain, Two No. 52 Drum Lifter Clamps and CO-1 Master Link |
| Notes | Working Load Limit Rated at 60° |
