Campbell #6410101 Single Drum Lifter No. 52 - 1/2 Metric Ton WLL - 1-3/4 in. Inside Eye Diameter
The Campbell #6410101 Single Drum Lifter No. 52 - 1/2 Metric Ton WLL - 1-3/4 in. Inside Eye Diameter from Industrial Hardware and Specialties is designed to lift a great variety of drums with or without heads from horizontal, vertical, or reversed positions. The Campbell UPC number 020418095634 has a working load limit of a 1/2 metric ton, and a inside diameter of the eye of 1-3/4". Made in the USA
The Campbell #6410101 Single Drum Lifter No. 52 - 1/2 Metric Ton WLL - 1-3/4 in. Inside Eye Diameter is a versatile American Made clamp designed to accommodate a great variety of drums with or without heads removed. The clamp has a Working Load Limit of 1/2 metric ton, and a inside diameter of the eye of 1-3/4".It snaps onto the drum and is held there by its spring-loaded cam, even if there is no load. Drums can be lifted from horizontal or vertical position and reversed.You can purchase the Campbell #6410101 at Industrial Hardware and Specialties today.
Campbell #6410101 Single Drum Lifter No. 52 - 1/2 Metric Ton WLL - 1-3/4 in. Inside Eye Diameter
- Lifts Steel Drums With or Without Heads Removed
- Drums Can Be Lifted From Either Horizontal or Vertical Positions and Then Reversed
- Snaps Onto Drum and is Held There By Its Spring Loaded Cam Even When There is No Load
- Note: This Clamp is Not Suitable for Lifting Plates or Sheets
| Vendor | Campbell® Chain & Fittings |
|---|---|
| Apex Catalog Number | 6410101 |
| UPC | 020418095634 |
| Minimum Grip Width | 1/16 in |
| Maximum Grip Width | 7/8 in |
| Working Load Limit | 1102 lb (1/2 Metric Ton) |
