C-Clamp Ductile W/Locknut With 3/4 in. Jaw Opening From Malleable Iron-E.G. (Zinc Plated) For 3/4-10
The C-Clamp Ductile W/Locknut With 3/4 in. Jaw Opening From Malleable Iron-E.G. (Zinc Plated) For 3/4-10 is designed to secure InSpec all channel or threaded rod to flanges, beams, or supports. Check out the complete Industrial Hardware and Specialties Beam Clamp Catalog, to see the complete line offered.
From Industrial Hardware and Specialties InSpec line we have the 3D-101-504 or the C-Clamp Ductile W/Locknut With 3/4 in. Jaw Opening From Malleable Iron-E.G. (Zinc Plated) For 3/4-10. Formerly known as the 1F-101-5-04 or 5216-201 this malleable iron electro-galvanized (zinc plated) c-clamp w/locknut is designed for attatchment to I-beams, channels, and wide flange beams where thickness does not exceed 3/4".The C-Clamp Ductile W/Locknut With 3/4 in. Jaw Opening From Malleable Iron-E.G. (Zinc Plated) For 3/4-10 has a max recommended load of (500 lbs.), and is designed to be used with 3/4-10 threaded rod.
C-Clamp Ductile W/Locknut With 3/4 in. Jaw Opening From Malleable Iron-E.G. (Zinc Plated) For 3/4-10
| Vendor | InSpec |
|---|---|
| Old Part# | 1F-101-5-04 |
| Series | 5216-201 |
| Clamp Type | C-Clamp Ductile W/Locknut |
| For Use with | All Channel ( Strut ) |
| Material/Finish (Mtrl/Fin) | Malleable Iron Electro-Galvanized (Zinc Plated) |
| Max Recommended Load | 500 |
| Rod Size | 00.750 ( 3/4-10 ) |
| Catalog Page# | 43 |
