90 Degree Corner Joint Connector From Steel-E.G. (Zinc Plated) With 2-5/16 in. Leg And 3-Holes
The 90 Degree Corner Joint Connector From Steel-E.G. (Zinc Plated) With 2-5/16 in. Leg And 3-Holes is designed to fasten to or join together sections of all channel ( strut ).InSpec 90 Degree Angle Fittings are made of electro galvanized zinc plated steel to handle high compression loads.
From Industrial Hardware and Specialties InSpec line is the 3D-257-F01 or the 90 Degree Corner Joint Connector From Steel-E.G. (Zinc Plated) With 2-5/16 in. Leg And 3-Holes. Formely known as the 1F-257-F-01 or 4658 this 90 Degree Angle Fitting is designed to be used with all channel ( strut ). The 3D-232-F01 is constructed from steel, wiith an electro-galvanized zinc plating, and a dimension of 3-1/2" x 1-5/8" x 2-5/16". This 3-hole fitting is best suited for 1/2" bolts. The 90 Degree Corner Joint Connector From Steel-E.G. (Zinc Plated) With 2-5/16 in. Leg And 3-Holes is equivlent to : G-STRUT G-307-1, UNISTRUT P1357, POWERSTRUT PS 746, SUPERSTRUT AB274, B-LINE B125, PHD 5180.
90 Degree Corner Joint Connector From Steel-E.G. (Zinc Plated) With 2-5/16 in. Leg And 3-Holes
| Vendor | InSpec |
|---|---|
| Old Part# | 1F-257-F-01 |
| Series | 4658 |
| Catalog Page# | 17 |
| Fitting Type | 90° Corner Joint Connector 3-Hole |
| For Use with | All Channel ( Strut ) |
| Material/Finish (Mtrl/Fin) | Steel Electro-Galvanized (Zinc Plated) |
| Hole Count ( Hole# ) | 3 |
| Dimension | 3-1/2 x 1-5/8 x 2-5/16 |
| Thickness | 1/4 |
| Hole Size | 0.56 (9/16") |
| Bolt Size | 0.50 (1/2") |
| Distance (Hole â„„) | 1-7/8 |
| B-LINE® | B125 |
| G-STRUT® | G-307-1 |
| PHD® | 5180 |
| POWERSTRUT® | PS 746 |
| SUPERSTRUT® | AB274 |
| UNISTRUT® | P1357 |
