3/8 x 3-3/4 InSpec® Sleeve Anchor Round Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
SKU
20A-1L13C
Special Price
$ 1.97
Regular Price
$ 2.91
3/8 x 3-3/4 InSpec® Sleeve Anchor Round Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is available to buy in increments of 50
3/8" x 3-3/4" long round head sleeve anchor with a phillips/slotted combo drive from Steel Zinc CR+3 (RoHS). This Round Head Phillips/Slotted Combo Masonry Expansion Sleeve Anchor has a minimum 1-1/4" embed depth with ultimate holding values of 2314 lb. pullout, and 3793 lb. shear in 4000 psi concrete.
3/8 x 3-3/4 InSpec® Sleeve Anchor Round Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
The 3/8 x 3-3/4 InSpec® Sleeve Anchor Round Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 3/8" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1L13C
- Diameter3/8"
- Effective Anchor Length3/8-18 x 3 3/4"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1-1/4"
- Bolt Diameter5/16"
- 4000 PSI Pull Out2314 lbs.
- 4000 PSI Shear3793 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
