3/4 x 2-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F20
Special Price
$ 5.43
Regular Price
$ 8.02
- Buy 60 for $ 1.92 each and save 65%
3/4 x 2-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 10
3/4" x 2-1/2" long sleeve anchor with a 5/8" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 2" embed depth with ultimate holding values of 5062 lb. pullout, and 10955 lb. shear in 4000 psi concrete.
3/4 x 2-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 3/4 x 2-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 3/4" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F20
- Diameter3/4"
- Effective Anchor Length3/4-11 x 2 1/2"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth2"
- Bolt Diameter5/8"
- 4000 PSI Pull Out5062 lbs.
- 4000 PSI Shear10955 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
