1/4 x 3-1/4 Self-Drilling Acoustical Eye Lag Screws Zinc Plated For Suspended Ceiling
The 1/4 x 3-1/4 Self-Drilling Acoustical Eye Lag Screws Zinc Plated For Suspended Ceiling applications from Industrial Hardware and Specialties are designed to attach drop ceiling tie wires to steel.These 1/4" self-drilling eye lags have an acoustical eye lag head, are zinc plated, 3-1/4" long, and should be installed with an acoustical eye lag drive bit. The self-drilling screw is sold in box sizes of 1000 pcs ( 25 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the 1/4 x 3-1/4 Self-Drilling Acoustical Eye Lag Screws Zinc Plated For Suspended Ceiling. These self-drilling acoustical eye lags are designed to be used in applications where you need to attach drop ceiling tie wires to steel.They are constructed from zinc plated steel. The zinc plating is applied electrically to the fastener providing a protective barrier that helps prevent oxidation. Salt sprayed tested to 24 hours, the 355-EA6 should only be used in indoors or in non-corrosive applications. These 1/4 eye lags have a acoustical eye lag head and should be installed with an acoustical eye lag bit. The fastener is 3-1/4" long with a self-drilling point. You can purchase these self-drilling acoustical eye lags from Industrial Hardware and Specialties in boxes of 1000pcs ( 25 lbs.).
1/4 x 3-1/4 Self-Drilling Acoustical Eye Lag Screws Zinc Plated For Suspended Ceiling
- Meets ASTM A 5101 for carbon steel manufacturing
- Meets F.I.P.3 -1000.7 for torsional strength and drill speed
- Meets ASTM F1941 for corrosion resistance
| Vendor | InSpec |
|---|---|
| Category | Acoustical Eye Lag |
| Length (in.) | 3-1/4 |
| Surface Coating | Zinc Plated |
| Head Type | Acoustical Eye Lag |
| Drive Type | Acoustical Eye Lag Bit |
| Diameter Ø TPI | 1/4 |
| Drill Point | Self-Drilling |
| Application | Attaches drop ceiling tie wires to steel. |
| Box Size | 1000 |
