1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
- Buy 125 for .77¢ each and save 65%
1/2" x 4" long sleeve anchor with a 3/8" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 1-1/2" embed depth with ultimate holding values of 5625 lb. pullout, and 7092 lb. shear in 4000 psi concrete.
1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 1/2" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F13
- Diameter1/2"
- Effective Anchor Length1/2-16 x 4"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1-1/2"
- Bolt Diameter3/8"
- 4000 PSI Pull Out5625 lbs.
- 4000 PSI Shear7092 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
Material Grade | Steel Zinc CR+3 (RoHS) |
---|